68
WebConsole - Security Options
Security Presets
The Master provides three levels of security setting presets: Low, Medium, and High. Each level is a preset of various security set-
tings. The following table
describes each of the Security Presets presented on the General section of the Security page:
Once any of the settings have been modified, press the
Accept
button to save these changes to the Master. Once these changes
are saved, the following message appears:
“Device must be rebooted for the setting to take effect. To reboot, go to the System
Devices page.”
A link appears which you can click to jump to the System Devices page (see the
System - Devices
81 for more information.) Click the
Reboot
button to remotely reboot the target Master.
Audit Logs
An audit log includes the date/time of the event, the event type, the software or hardware component where the event occurred,
the source of the event, the subject identity, and the outcome of the event. For events related to a remote device, the audit log
includes the source and destination network addresses and ports or protocol identifiers. The Master generates an audit record for
the following events:
Each successful or unsuccessful attempt to access security files
Alerts and errors
Starting/Shutting down audit logging
Any blocking (including the reason) of access based on a UID, terminal, or access port
Any configuration change. The record includes the source and destination network addresses and ports or protocol identi-
fiers.
Denial of access due to excessive login attempts
Each log off
Each successful or unsuccessful attempt to log on to the application
Successfully or unsuccessfully loading and starting a Duet module
Modification of permissions associated with roles
Connection and loss of connection to an NTP server. (Loss of connection is defined as three successive failed polls. A single
successful poll constitutes a re-connection.
System reboot
Software or firmware updates
Creation, modification, and deletion of user accounts
NOTE:
The Master retains audit log records for 30 days (or less depending on available space), after which they are automatically
purged.
Instruction Manual - Incite Digital Video Presentation Systems
Security Presets
Preset
Low
Medium
High
Audit Log
Off
On
On
Banner Display
Off
On
On
USB Host Port
Enabled
Enabled
Disabled
Authentication On Server Ports
Required
Required
Required
Inactivity Timeout
Off
On
On
Password Expiration
Disabled
Enabled
Enabled
Cryptography Strength
Low
Low
High
Password Complexity
Low
Medium
High
Lockout Access
Off
On
On
FTP/SFTP
Both enabled
Disabled/Enabled
Disabled/Disabled
HTTP/HTTPS
Both enabled
Disabled/Enabled
Disabled/Disabled
Telnet/SSH
Both enabled
Disabled/Enabled
Disabled/Disabled
OCSP
Disabled
Disabled
Enabled
Switcher Secure Mode
Disabled
Disabled
Enabled
Authenticate AMX Devices on
ICSLAN Ports
Not required
Required
Required
ICSLAN AMX Device Connection
ICSPS enabled, ICSP enabled -
without encryption
ICSPS enabled, ICSP enabled - with
encryption
ICSPS enabled, ICSP disabled
Authenticate AMX Devices on
LAN Ports
Not required
Required
Required
LAN AMX Device Connection
ICSPS enabled, ICSP enabled -
without encryption
ICSPS enabled, ICSP enabled - with
encryption
ICSPS enabled, ICSP disabled
