94
Select Logo File – Click to search and locate a logo file on a local or network drive.
Save All Logos – Click to save all logos that you loaded.
On-Screen Display:
Enable OSD – Click the check box to enable.
OSD Color – From the drop-down list, select Black, Blue, White, or Yellow.
OSD Position – From the drop-down list, select Top Left, Top Right, Bottom Left, or Bottom Right.
Picture Settings:
Brightness – Use the slider bar to adjust (range: 0 to 100).
Contrast – Use the slider bar to adjust (range: 0 to 100).
Audio Settings
Audio settings display when the Audio tabbed view is selected, and a specific input or output is selected. The audio settings
can be used to configure any digital signal processing required for the audio signal that is selected in the Switching view.
Inputs
Analog Audio – Click to enable analog as the audio format of the selected audio input.
General:
Logo Setup:
WebConsole - Switcher Options
Stereo or Mono buttons – Click either to select the audio mode. Setting this option to Mono audio on the input
results in the left channel being sent to both the left and right output channels.
Input Gain (dB) – Use the slider bar to adjust (-24 dB to +24 dB),
Encoding – PCM (read only)
Instruction Manual - Incite Digital Video Presentation Systems
