97
Bell = 0.1 to 20
Band Pass = 0.1 to 20
Band Stop = 0.1 to 20
High Pass = 0.5 to 1.4
Low Pass = 0.5 to 1.4
Treble Shelf = 0.5 to 1
Bass Shelf = 0.5 to 1
Mix:
Input – Use the slider to adjust the mix level of the audio input for the audio group.
Mic1 and Mic2 – Use the sliders to adjust the mix level of the microphone for the audio group.
10-Band Parametric Equalizer:
WebConsole - Switcher Options
Advanced Feedback Suppression – Click to activate.
Enabled – This check box must be selected before the Equalizer options are available. On reboot, the Enabled box
always returns to the checked (default) state. To disable the Equalizer options over a reboot, set the “y” (vertical)
vertex to 0 (zero).
Tone Adjust – Use the drop-down box to select: Off, Voice, Music, or Movie (Tone Adjust is applied on top of any
equalizer adjustments).
Reset EQ – Click this button to reset the all of the Equalizer values.
Blue Handles – Use the sliders (blue handles) to adjust Equalizer values.
The following drop-down lists can also be used to adjust Equalizer values.
Band – Numbered from 1 to 10.
Filter – The options are Bell, Band Pass, Band Stop, High Pass, Low Pass, Treble Shelf, and Bass Shelf.
Frequency – The adjustment range is from 20 to 20000 (Hz).
Gain – The adjustment range is from -12 to 12.
Q – The adjustment range depends on the filter selected:
Instruction Manual - Incite Digital Video Presentation Systems
