87
WebConsole - Modules Options
Modules - User-Defined Devices
Click the
User-Defined Devices
link (in the
Manage Devices
tab) to access the
User-Defined Devices
page (FIG. 89). This page
provides a listing with all of the dynamic devices that have been discovered in the system, and allows you to add and delete
User-Defined Devices.
FIG. 89
Modules - User-Defined Devices
Adding a User-Defined Device
1. Click the
Add Device
button (in the User-Defined Devices page) to access the
Add User Defined Device
page
(FIG. 90):
FIG. 90
User-Defined Devices - Add New Device
2. Fill in the device information fields, as described in the following tables:
Instruction Manual - Incite Digital Video Presentation Systems
User-Defined Device Information Fields
Address:
Enter the address of the physical device in the Address field. This information can be either the NetLinx Master port value
(D:P:S) or an IP Address (#.#.#.#).
Control Method:
Use the drop-down list to select the control method associated with the physical target device (IR, IP, Serial, Other).
SDK Class:
Use the drop-down list to select the closest Device SDK class type match for the physical target device. The SDK Class
Types table on page 88 provides a listing of the available choices.
GUID:
Enter the manufacturer-specified device’s GUID (Global Unique Identification) information. You must specify either the GUID
or Make/Model.
Make:
Enter the name of the manufacturer for the device being used (ex: Sony, ONKYO, etc.)
• Up to 55 alpha-numeric characters
• Spaces in the name will be converted to underscores.
Model:
Enter the model number of the device being used (ex: Mega-Tuner 1000). You can enter up to 255 alpha-numeric characters.
Revision
Enter the firmware version used by the target device. Text is required within this field. The version must be in the format:
major.minor.micro (where major, minor, and micro are numbers). An example is: 1.0.0 (revision 1.0.0 of the device firmware).
