95
Enable – Click to activate the microphone.
Phantom Power – Click to activate Phantom Power on the microphone.
PreAmp Gain – Use the lever to adjust the preamp gain level of the microphone input. You can set the gain from 0 to
+65dB in 1dB increments.
Gain – Use the lever to adjust the gain level of the microphone input. You can set the gain from -24 to 24dB in 1dB
increments.
Equalizer – Click Enabled to turn on the equalizer settings. Use the options to set the Band, Filter, Frequency, Gain, and
Q settings.
Gating – Use the slider bar to adjust the Threshold setting (range: 0 to -60). Adjust the values in the boxes for the
Attack, Release, Depth, and Hold Off settings (either enter values or use the arrows).
Limiter – Use the slider bar to adjust the Threshold setting (range: 0 to -60). Adjust the values in the boxes for the
Attack and Release settings (either enter values or use the arrows).
Compression – Use the slider bar to adjust the Threshold setting (range: 0 to -60). Adjust the values in the boxes for
the Attack, Release, and Ratio settings (either enter values or use the arrows).
Show Audio Levels – Click to open a new window tab which displays the Level Meter for the microphone and audio input.
WebConsole - Switcher Options
Compression:
Buttons at top – Click Off, Low, Medium, High, or Custom.
Threshold – Use the slider bar to adjust (range: 0 to -60).
Attack (ms), Release (ms), and Ratio – Adjust the values in the boxes (either enter values or use the arrows)
NOTE:
When in Low, Medium, or High, changes to any of the other Compression settings will automatically change the Compres-
sor mode to Custom.
Microphone
Microphone settings are available on the Audio Input tab.
Mode
Dual Mono/Single Stereo – Click to select Single Stereo or Dual Mono microphone mode. Select Single Stereo to adjust
both microphone inputs or Dual Mono Mode to adjust the microphone settings individually.
L/R Adjustment
Instruction Manual - Incite Digital Video Presentation Systems
