NXR-ZGW-PRO Configuration Pages
22
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Configuration - NetLinx Settings tab
Click the
NetLinx Settings
tab of the
Configuration
page to access the
NetLinx Settings
options. The options
in this tab are used to view or edit the NetLinx settings for this gateway (FIG. 12):
Editing NetLinx Settings
1.
In the menu at the top of the NXR-ZGW Browser-Based Configuration Manager, select
NetLinx Settings
under the section
Configuration
.
2.
The
Connection
field cannot be changed from this page.
3.
Select between the choices in the
Mode
dropdown menu for the desired NetLinx mode.
4.
Enter the network system number in the
System Number
field (Automode only).
5.
Enter the device number in the
Device Number
field.
FIG. 12
NetLinx Settings Page
Configuration - NetLinx Settings tab options
Connection
The mode in which the connection to the master is being made.
Default:
ID Mode.
Mode
The NetLinx mode being used. Selected from:
• TCP Auto
• TCP URL
• TCP Listen
• UDP URL
System Number
The number for the NetLinx network
Device Number
The network number assigned to the device
Master IP/URL:
The IP address or URL assigned to the master
Master Port Number
The port used by the master
Security
The current selected security setting for the network:
• None
• Authenticated
• Encrypted
Note: Security settings are determined by the master, and cannot be changed from
this page. For more information, refer to the security setup information for the
master.
Username
The user name registered with the master
Password
The password registered with the master.
