manualshive.com logo in svg

AMX NetLinx NXR-ZGW-PRO, Operation/Reference Manual

The AMX NetLinx NXR-ZGW-PRO is a cutting-edge control system designed for seamless integration of various devices. Ensure smooth operation and maximize functionality with our comprehensive and user-friendly Operation/Reference Manual. Download the manual for free on 88.208.23.73:8080 and unlock the full potential of your AMX NetLinx NXR-ZGW-PRO.

Share
Download
background image

Table of Contents

i

NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater

Table of Contents

Overview ............................................................................................................1

NXR-ZGW-PRO NetLinx ZigBee Pro Gateway   ........................................................ 1

NXR-ZRP-PRO NetLinx ZigBee Pro Repeater  .......................................................... 3

How ZigBee works.................................................................................................... 4

Network Structure ..........................................................................................................  4

Security ...........................................................................................................................  5

Personal Area Network - Limitations...............................................................................  5

Mesh Network Arrangements................................................................................... 5

Single Gateway Installations ...........................................................................................  5

Multiple Gateway Installations ........................................................................................  6

Patents...................................................................................................................... 7

FCC Warning Statement ........................................................................................... 7

Installation ..........................................................................................................9

Overview .................................................................................................................. 9

Location and Antenna Direction......................................................................................  9

Connecting the Optional Accessory Antennas.......................................................... 9

Connecting Power to the NXR-ZGW-PRO and NXR-ZRP-PRO ................................ 10

Determining the Power Source .....................................................................................  10

Preparing Captive Wires for the 2-pin 3.5mm Captive Wire PWR Connector ...............  10

Using the PSN NetLinx connector for power ................................................................  10

Connecting the NXR-ZGW-PRO to a LAN ............................................................... 11

Table-Top Installation ............................................................................................. 11

Rack-Mount Installation .......................................................................................... 11

Setting up a network ........................................................................................13

Overview ................................................................................................................ 13

Entering Devices Onto a Network .......................................................................... 14

NXR-ZGW-PRO Configuration Pages ................................................................17

Overview ................................................................................................................ 17

Configuration Manager........................................................................................... 17

Summary of Gateway Settings................................................................................ 18

Checking the Firmware Version................................................................................................. 19
Checking the ZigBee Firmware Version .................................................................................... 19
Determining the IP Settings of the NXR-ZGW-PRO .................................................................. 19
Finding the ICSP Device Number of the NXR-ZGW-PRO .......................................................... 19
Determining the PAN Settings of the NXR-ZGW-PRO .............................................................. 19
Determining the ZigBee Stack Profile ....................................................................................... 19
Rebooting the NXR-ZGW-PRO .................................................................................................. 19

Summary of Contents for NetLinx NXR-ZGW-PRO















































Reviews:

No comments

Related manuals for NetLinx NXR-ZGW-PRO

Multitech MultiConnect Conduit Getting Started Manual preview
MultiConnect Conduit
Brand: Multitech Pages: 37
B&B Electronics Vlinx MESR901 Manual preview
Vlinx MESR901
Brand: B&B Electronics Pages: 83
Advantech UNO-410 User Manual preview
UNO-410
Brand: Advantech Pages: 66
Echelon 100150-201 Setup Manual preview
100150-201
Brand: Echelon Pages: 3
Bacharach BACnet Protocol Installation Manual preview
BACnet Protocol
Brand: Bacharach Pages: 12
ZKTeco F16 Quick Start Manual preview
F16
Brand: ZKTeco Pages: 20
Perenio PEACG01 Installation And Operation Manual preview
PEACG01
Brand: Perenio Pages: 32
Planet VIP-450 Reference Manual preview
VIP-450
Brand: Planet Pages: 8
Planet IMG-110T Quick Installation Manual preview
IMG-110T
Brand: Planet Pages: 16
Planet HAC-1000 Quick Installation Manual preview
HAC-1000
Brand: Planet Pages: 16
Planet WSG-401 User Manual preview
WSG-401
Brand: Planet Pages: 131
MCK PBXgateway Quick Installation Manual preview
PBXgateway
Brand: MCK Pages: 18
FireAngel WG-2 Installation Manual preview
WG-2
Brand: FireAngel Pages: 8
Gardena SmartSystem Quick Start Manual preview
SmartSystem
Brand: Gardena Pages: 2
Innovision MGL60 User Manual preview
MGL60
Brand: Innovision Pages: 9
NanoSense EnOcean User Manual preview
EnOcean
Brand: NanoSense Pages: 25
Arris DCX3600 User Manual preview
DCX3600
Brand: Arris Pages: 42
YANZI IoT Gateway 2 Product Brief preview
IoT Gateway 2
Brand: YANZI Pages: 2

Brands by name

Popular brands

Load more brands