WebApp
64
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
Instructions
The Instructions shown at the bottom of the Admin screen provide a guide to using the NetLinx commands in the above sections.
Administrator - TV Settings
The TV selection enables Admin users to upload their JSON coded channel configuration files or define a Vision 2 Video Server, test
them, and configure their default behavior when the app is launched.
NOTE:
If Enzo settings were recently reset, start a new Enzo session before making changes in the WepApp.
1.
From the WebApp Home screen, click on the TV icon or the TV top menu bar selection (FIG. 123). A mouse-over of the TV
menu bar will show an Admin selection. This is the same menu as if clicking on the other options just mentioned.
Channel Configuration Settings
The Channel Configuration menu appears (FIG. 124). If using a Vision 2 video server as a video source, select the Vision 2 option which will
change user configuration options. Go to
on page 66. If not using Vision 2 as a video server, continue.
NOTE:
For creating Vision2 Producer channels, refer to the Best Practices documented in the Vision2 Instruction Manual available at
www.amx.com.
JSON File Configuration
Under
Configuration File:
, enter a URL, which includes HTTP and FTP, to configure a channel list that is stored on an FTP server.
Examples of a Json file are included in the Enzo Programmers Guide available at www.amx.com/products/NMX-MM-1000. There are
also example files available for download from the product page located under the "Device Modules" section on the right side of the
page:
http://www.amx.com/products/NMX-MM-1000.asp
1.
Choose file option to launch a file folder window on your local machine and select the file from your stored location. Refer to
the Programmers Guide for a JSON file example.
Instructions
A set of instructions are provided at the bottom of the page for tips on configuring JSON files into ENZO.
NOTE:
This Configuration File option is not available for iOS devices.
2.
Once your file is selected and displayed in the Configuration file window, click on
Upload
to upload the configuration file to
Enzo (FIG. 126).
3.
When the file is uploaded, Enzo will automatically test it (FIG. 127).
4.
Once the file is tested, Enzo will show if it successfully passed (FIG. 128).
5.
http://www.amx.com/products
under the Presentation Systems option
.
FIG. 122
WebApp Home Page Instructions
FIG. 123
WebApp TV Menu Selection
Select TV or the TV Icon
