WebApp
54
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
The Manage Connections screen is accessible to both Administrators and Moderators, but managing connections in Conference
mode is expected to be a Moderator task. This screen controls which MirrorOp presenters are displayed on the MirrorOp display.
Many presenters can be connected to Enzo at once, but only up to four inputs may display in four quadrants of the screen at one
time. Each of the four active sender lines are color matched to the quadrant in which it is being displayed.
1.
Log into the WebApp using admin or the following credentials:
Username: moderator
Password: moderator
2.
Admin users select
MirrorOp
in the top header or the icon in the main screen area. Moderators continue with Step 3.
3.
A tutorial (FIG. 103) appears describing how to select a Sender from a list and then selecting the Display Area to place that
sender in.
4.
Select
Dismiss
to remove the Web UI instructions and begin managing connections. To remove this tutorial from subsequent
sessions using this browser, check the “
Do not show again?”
box in the bottom left corner. These instructions will still be
visible by other users unless they opt out. Clearing browser cache will also bring back these instructions when logging into
Manage Connections.
NOTE:
The check box on Web UI instructions popup is not displayed when using browsers that do not support local storage, such as
IE11 on Windows8.
5.
Click on a connection from the left side Sender list first, and then click on a quadrant or full screen will make that Sender
active and display in that location. The quadrants are color coded with the Senders List as shown (FIG. 104).
FIG. 103
Manage Connections - Web UI Instructions
FIG. 104
Manage Connections Area
Admin user enables these options for Moderator control
