WebApp
57
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
The MirrorOp Sender will then appear as shown in FIG. 110. Enter the IP or Hostname in the bottom field. Once connected to Enzo,
type the four digit passcode displayed on the Enzo MirrorOp screen and click
OK
.
The Sender then appears as shown.
Administrators can prepare their content on their devices and then press the Play button (FIG. 112) to begin presenting.
To select a quadrant for multiple presenters, click on the table icon circled in FIG. 113, and select an option.
FIG. 110
MirrorOp Login Window
FIG. 111
MirrorOp Sender Window
FIG. 112
MirrorOp Sender Options
FIG. 113
Display on a MirrorOp Quadrant
Second, type in the MirrorOp passcode from the Enzo display.
First type in the IP address or Hostname of the Enzo to display on.
Presenter appears as shown.
After 3 seconds the App reduces
size to this.
After 3 additional seconds
the App reduces size to this.
Play Stop
Mute
Pause
Quadrant
Enzo List
Options
Select a Quadrant to display in on the screen.
