WebApp
66
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
Vision 2 Configuration
Toggling the selectable Vision 2 options to ON will change the Channel Configuration options as shown (FIG. 130). Toggling the
Vision 2 option to "ON" changes the Channel Configuration settings to enable connecting to a Vision 2 server. Once the server is
connected, the end user will see the Video On Demand (VOD) line up when selecting the Guide view.
NOTE:
For creating Vision2 Producer channels, refer to the Best Practices documented in the Vision2 Instruction Manual available at
www.amx.com.
NOTE:
When the guide is open and the Admin toggles Vision2 On and Off, the users needs to close the Guide and reopen to reflect the
change.
1.
Enter the URL of the Vision 2 video server using the format and example shown below:
• Format - http://[IP Address of Vision2 Server]
• Example - http://10.35.84.138
NOTE:
The protocol (http://) MUST be included before the IP address.
2.
Enzo will go through a series of confirmations such as Saving and Testing, and Success or Failure (FIG. 131). If the connection
fails, check your server URL and resubmit.
NOTE:
Expect a several minute delay when submitting an invalid or otherwise unresponsive server IP.
3.
Enabling Vision 2 introduces an additional configuration screen called
Video On Demand
outlined in the next section.
4.
Select one of the radial, buttons to determine how the TV functions when resuming operation in a new session.
Live Channel - When starting a new session and opening the TV app, the app will tune to the previous live channel or the
first live channel on the list if no previous channel is available.
Video On Demand - When starting a new session and opening the TV App, the App resumes at the beginning of the last VOD
selected.
FIG. 130
WebApp - TV - Vision 2 Settings Screen
FIG. 131
WebApp - TV - Vision 2 Submission
Selecting Vision 2 "ON" enables the URL option below.
Enter the URL address of your Vision 2 Video Server and select Submit.
Determine what information is displayed on App launch
Saving and Testing Vision 2 URL
Successful Test of URL
