AMX Novara DCS1000 Device Configuration Software
48
Novara ControlPads & KeyPads
Creating New IR Libraries Using an IRIS IR/Serial Data Capture Device
To create new libraries using a manufacturers handset and an AMX IRIS Unit (FIG. 77):
1.
In the AMX IR Libraries dialog, select File > New.
2.
In the Save As dialog, enter a name for the Library File and click Save.
3.
In the AMX IR Libraries dialog, click Add New Device to invoke the Add New Device fields (FIG. 30):
4.
Enter the Device Make (model) and Description, and click Save Device.
5.
Click on Learn new function to invoke the Learn Function fields (FIG. 79):
6.
Connect the IRIS to your PC:
a.
Connect an RS-232 cable to the DB-9 connector on the IRIS unit and an RS-232 port on your PC.
b.
Set the baud rate in the IRIS unit to match the PC baud rate.
c.
Then, connect the 12
VDC
or 12
VAC
power supply to the 12
VDC
connector on the IRIS unit.
d.
The
READY
LED
lights and 01 appears in the display.
The IRIS (FG5448) is a stand-alone, self-contained unit used to capture IR or wired
function signals from a hand controller. Once captured and verified, the control
functions are sent to a PC operating a IR Library program, like Novara DCS or IREdit
For details on using the IRIS, refer to the IRIS Operation/Reference Guide (available
at www.amx.com).
FIG. 77
AMX IRIS IR Capture Unit
FIG. 78
AMX IR Library dialog - Add New Device fields
FIG. 79
AMX IR Library dialog - Learn New Functions fields
Summary of Contents for Novara 1000 Series
