Configuration
14
NXB-KNX KNX Communications Gateway
Select
NIST Servers
from the Clock Manager sub-menu (or from the main Clock Manager page), and the
NIST Server
Manager
page will be displayed (FIG. 20):
Note that this tab is enabled only if
Network Time
is selected (on the Mode Manager page).
The options on this page allow you to select the NIST server that will be queried at each clock synchronization, and
allow you to add more NIST servers to the list.
To add a NIST server, enter the
NIST Server Name
,
IP Address
and
Location
in the fields provided.
To remove a NIST server from the list, click the
Remove
button.
Click
Accept
to save your changes. Note that changes on this page take effect immediately.
Click
Cancel
to cancel any changes.
FIG. 20
Clock Manager - NIST Server Manager page
Only one NIST server is selectable at any given time.
