AMX RMS Administrator'S Manual Download

Page: 179 / 212

Configuration Page

167

RMS - Administrator’s Guide

System Licensing Page

The RMS application is licensed by the total number of rooms that can be configured within the system.

For each room required, you need either one

Scheduling

license, one

Asset

license, or both.

When adding a room, the licensing information is displayed to let you know how many licenses you have
remaining (FIG. 158).

To obtain an RMS License, please contact AMX at 800-222-0193, by email at
service@amx.com or contact your AMX dealer.

FIG. 158

System Licensing Page

System Licensing

• Licensed

The type of RMS server license. Standard indicates a constrained license
while Premium is a fully functioning version of RMS.

• Software Serial Number

The Serial number of the server software and the license key.

• Total Scheduling Licenses

The total number of scheduling licenses installed.

• Scheduling Licenses In Use

The number of scheduling licenses in use.

• Scheduling Licenses Available The number of scheduling licenses available for use.

• Total Asset Licenses

The total number of asset licenses installed.

• Asset Licenses In Use

The number of asset licenses in use.

• Asset Licenses Available

The number of asset licenses available for use.

• Certificate ID

This table lists the client certificates installed on the license key. Each client
certificate has a certificate ID.

• Client Type

The client type of the license, either

Asset

Scheduling

Summary of Contents for RMS





















































































































































































































Search results

Summary of Contents for RMS

Reviews:

Related manuals for RMS

Brands by name

Popular brands

AMX RMS, Administrator'S Manual

Search results

Summary of Contents for RMS

Reviews:

Related manuals for RMS

Brands by name

Popular brands