P·16
fig. 11
• Joystick: the joystick is used to control the movements of the wheelchair, including its
speed and direction (forwards, backwards, left or right, etc.). The more you push the
joystick forward from its central position, the more quickly the wheelchair moves.
Each time you release the joystick, it automatically returns to the center and the brake
automatically stops the wheelchair.
• Horn: the horn sounds if you press this button.
• Acceleration / deceleration buttons and speedometer: after turning on the wheelchair
the speedometer indicates the current maximum speed setting.This can be adjusted by
the user by using the same button.
• Charger socket: the socket should only be used for this wheelchair. Do not use the
plug to power other electrical devices. Otherwise, it could damage the chair’s control
system or its E.M.C performance (electromagnetic tolerance).
6.1.2 Battery usage
Fully charge the batteries before the first use. This brings the batteries to approximately 90%
of their capacity.
Upon the second battery charge (8-14 hours) they will obtain more than 90% of their
capacity. After four or five charge charge-cycles, the batteries will recharge to 100% and will
last longer. Please replace the batteries in case of failure. The old batteries must be returned
to the supplier to avoid unnecessary pollution of the environment.
NOTE
If your wheelchair accidentally moves, immediately release the
joystick and the chair will stop automatically.
WARNING!
If you connect devices to the outlet other than the supplied battery
charger, damaging the control system, the warranty will be canceled.
Battery specification
Type
Lithium battery
Dimensions
330 mm x 105 mm x 65 mm
Voltage
24V
Capacity
2x10Ah
