background image

P·20

WARNING!

In order to guarantee the quality of the electric wheelchair, please 

contact your dealer to replace the spare parts such as batteries, 

tyres, controller, motors and charger. Maintenance must be carried 

out by the dealer.

LED*

Anomaly Diagnosis

Breakdown location

1 LED lit

Week battery

Charge the battery.

2 LEDs lit

Left motor anomaly

Check the motor and its connections.  

3 LEDs lit

Left brake anomaly

Check that the brake lever is in the correct 
position and if the braking is damaged.

4 LEDs lit

Right motor anomaly  Check the motor and its connections.

5 LEDs lit

Right brake anomaly 

Check that the brake lever is in the correct 
position and if the braking is damaged.

6 LEDs lit

Control box overload Check if the brake is removed and if the wheels 

are locked.

7 LEDs lit

Joystick anomaly

Check that the joystick is in the central position.

8 LEDs lit

Control box anomaly Control box malfunction.

9 LEDs lit

Control box anomaly Control box malfunction.

VII. DIAGNOSIS & TROUBLE-SHOOTING

For your convenience, this product has an automatic fault warning function. In the event of a 
malfunction, the indicator lights on the controller flash and the horn sounds. You can identify 
a fault using the information in Table. If the problem persists after inspection of the fault, do 
not use the wheelchair. Turn it off and contact your dealer.

VIII. SAFETY DEVICES AND ACCIDENT 

MANAGEMENT

•  Fuse: please refer to 6.1.4 Surge protection
•  Safety belt: please refer to 6.1.6 Safety belt
•  Release the joystick in case of failure: the wheelchair will stop

* Joystick with remote control option

Summary of Contents for LOGO SILVER LightCHAIR II





























Reviews: