Amylior PD-A20608 Instruction Manual Download

Page: 2 / 5

ACCESSORY INSTALLATION - STELLA (

Cont’d

)

–

PD-A20608

–

Rev01

Slow-down brakes

Tools: 4 mm Allen key and a 14 mm combination wrench

1.1 Install the brake onto the

Stella’s wheel as shown below

(R on the right-hand side and
L on the left-hand side).

1.2 Attach the plate to the

brake.

1.3 Secure the plate by tightening

screws with 4 mm Allen key.

1.4 Repeat on other side.

1.5 Brake pressure adjustment.

1.5.1 Loosen both bolts with the 14 mm combination wrench

to allow the knob to turn.

1.5.2 Adjust brake pressure by

tightening/loosening the knob.

1.5.3 When the desired pressure is obtained,

tighten both bolts.

Summary of Contents for PD-A20608

Page 1: ...1 IG PD A20608 Rev01 STELLA ROLLATOR ACCESSORY INSTALLATION ...

Page 5: ...rame underneath the handle s height adjustment mechanism 5 2 Tighten both screws with a 4 mm Allen key Make sure that both screws are tight There should not be any movement in the armrest bracket 5 3 The armrest activation tension can be adjusted by tightening or loosening the screw using a 4 mm Allen key and a pair of pliers on the release tab side ...