AMYPOWER ALLTRACK R3 & R SERIES - Owner’s Manual (Rev. A)
18
E. PERFORMANCE CONTROL SETTINGS
NOTE - Seek advice regarding checking and adjusting settings.
It is vital to match control settings to your level of function and
ability.
Consult your health care professional and your supplier to select
the best control setting for you. For your safety, have the
setting of your chair verified every six months.
WARNING
Have your control settings re-adjusted immediately if you
notice any change in your ability to:
Control the joystick.
Avoid running into objects.
4. Control Settings can be adjusted by your dealer.
F. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the controller
from damage due to overheating. In extreme conditions (such as
repetitive hill climbing) the circuit will decrease the power to your
motors. This allows the chair to operate at a reduced speed. When
the controller cools, the chair will return to normal speed.
G. POWER SEATING OPERATION THROUGH THE JOYSTICK
The power tilt, recline, seat lift, elevating legrests or center mount
features on your chair can be operated using the joystick on your
chair.
1. 6-Key VR2 Joystick
(Activates power tilt or seat lift only)
A. For tilt or seat lift operation through this joystick, you must press
the mode switch to access seating options.
B. Once you have accessed the seating mode in your joystick, you
must pull the toggle to activate the power option, and push the
toggle in the opposite direction to return to the static mode.
2. R-net EL Joystick
(Activates multiple power options)
A. For tilt or seat lift operation through this joystick, you
must press the mode switch to access seating options.
B. Once you have accessed the seating mode of your
joystick, you must toggle left or right until the light showing
the power option you want to activate turns on.
C. Once you have accessed the seating mode in your
joystick, you must pull the toggle to activate the power
option, and push the toggle in the opposite direction to
return to the static mode.
3. R-net PM Joystick
(Activates multiple power options)
A. For tilt or seat lift operation through this joystick, you
must press the mode switch to access seating options.
B. Once you have accessed the seating mode of your
joystick, you must toggle left or right until the light showing
the power option you want to activate turns on.
C. Once you have accessed the seating mode in your
joystick, you must pull the toggle to activate the power
option, and push the toggle in the opposite direction to
return to the static mode.
PRESS
PRESS
TOGGLE
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
TOGGLE
PRESS
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
- PULL TOGGLE TO ACTIVATE OPTION
- PUSH TOGGLE TO RETURN OPTION
