18
C. ELEVATING LEGREST (OPTIONAL)
1. Installation
To install or remove Elevating legrests (ELR) see
instructions for Swing-away Footrest installation.
D. CENTER MOUNT HANGER ADJUSTMENT
(fig.1-2)
1. Height Adjustment
(fig.1)
a - Loosen the securing bolts (A)
with 5/32" Allen key.
b - Slide footplate to desired height.
c - Tighten bolts.
2. Calf Pad Adjustment
a - Loosen the securing bolt with 5/32" Allen key.
b - Move calf pad to desired height.
c - Tighten bolts.
E. JOYSTICK
Please refer to the PG Drives user’s manual provided with
the information package
F. TO ADJUST THE DEPTH OF THE JOYSTICK
(fig.3)
1. Loosen the wing-nut (B).
2. Slide the mounting bracket (tube) (C) in or out until in
desired position.
3. Retighten the wing-nut (B)
G. TO USE THE SWING AWAY FUNCTION
(fig.3-4)
1. Push down to release the lever (D)
2. Continue pushing down until the joystick bracket is
fully retracted.
3. To bring back, pull the joystick firmly towards you until
it gets back in its locked position (D)
t
VIII. SET-UP
A
D
B
C
D
4
3
1
2
Summary of Contents for R HybridHybrid
Page 1: ...Rev 01 February 2017...
