85
•
Insert it in the position of rubber protective hole facing downward
Replacement of parking light bulb
•
Open the front hood
•
Pull the socket end on which there is a bulb and which is located under the headlights
unit
•
Replace with an equivalent bulb
•
Insert the socket again
The Replacement of Side Signal Bulbs
•
Remove the lens from the case
•
Pull the bulb outwards by removing the screws of the case
•
Remove the socket
•
Replace with an equivalent bulb
•
Insert the lens by screwing the case to its place
The Replacement of Rear Signal, Rear Brake/Parking, Reverse Gear, Rear Fog Lights Bulbs
•
Remove the lens by removing its screws
•
Remove the bulb by turning
•
Replace with an equivalent bulb
•
Screw the lens with its rubber gasket
The Replacement of the Front Signal Bulbs
•
Open the front hood
•
Remove the headlights cap completely
•
Remove the front signal lights screws
•
Remove it from the socket
•
Replace with an equivalent bulb
•
Insert the front signal bulb to its place by screwing
The Replacement of the Day Drive Bulbs
•
Open the hood
•
Remove the headlights cap
•
Remove the brackets which prevent the bulbs on the cap dislodging by removing
their screws
•
Remove the bulbs from their slots
•
Remove the adapter (driver)
•
Replace with the equivalent bulb set
•
Insert the headlights cap by screwing the brackets
•
Insert the adapter (driver) by screwing
Summary of Contents for CITIPORT E6 2019
