Rev 05 Jun 2013 16:37 | Page 13
Figure 10. SPI Controller, ADCBase0
Note that other settings can be changed on the ADCBase0 tab (see Figure 10) and the ADCBase1
4.
and ADCBase2 tabs (see Figures 11 and 12) to set up the part in the desired mode. The
ADCBase0 tab settings affect ADC settings, whereas the settings on the ADCBase1 and
ADCBase2 tabs affect the JESD204B link settings. See the appropriate part data sheet, the
, High Speed ADC SPI Control Software, and the
Interfacing to High Speed ADCs via SPI, for additional information on the available settings.
