AD7091R User Guide
UG-409
Rev. 0 | Page 7 of 20
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The
EVAL-AD7091RSDZ
kit includes software on a CD.
Double-click the
setup.exe
file from the CD to run the install.
The default location for the software is
C:\Program Files\Analog Devices\AD7091R\
Install the evaluation software before connecting the evaluation
board and the
EVAL-SDP-CB1Z
board to the USB port of the
PC to ensure that the evaluation system is correctly recognized
when connected to the PC.
There are two parts to the installation:
•
EVAL-AD7091RSDZ
board software installation
•
EVAL-SDP-CB1Z
system demonstration platform board
drivers installation
Follow Step 1 to Step 4 (see Figure 3 to Figure 6) to install the
EVAL-AD7091RSDZ
software. Follow Step 5 to Step 8 (see
Figure 7 to Figure 10) to install the
EVAL-SDP-CB1Z
drivers.
Proceed through all of the installation steps, allowing the
software and drivers to be placed in the appropriate locations.
Connect the
EVAL-SDP-CB1Z
board to the PC only after the
software and drivers have been installed.
Figure 3.
EVAL-AD7091RSDZ
Installation—User Account Control
1.
Click
Yes
to begin the installation process.
Figure 4.
EVAL-AD7091RSDZ
Installation—Destination Directory
2.
Select the installation directory. Click
Next
.
Figure 5.
EVAL-AD7091RSDZ
Installation—Start Installation
3.
Click
Next
to install the software.
Figure 6.
EVAL-AD7091RSDZ
Installation—Installation Complete
4.
The installation of the evaluation software completes. Click
Next
to proceed with the installation of the drivers.
Figure 7.
EVAL-SDP-CB1Z
Drivers Installation—Setup Wizard
5.
The setup wizard opens. Click
Next
to begin the driver
installation process.
10702-
003
10702-
004
10702-
005
10702-
006
10702-
007
