ADSP-2181 EZ-KIT Lite Evaluation System Manual
2-13
Using EZ-KIT LITE Software
Debugging With EZ-KIT Lite
The Vi+ User’s Guide for 16-Bit Processors and online Help con-
tains most of the information you need to operate the Vi+
debugger with the EZ-KIT Lite evaluation board. Because the manual was
written using a simulator as a target, there are some differences and restric-
tions in the debugger operation when connected to a hardware target.
Loading Programs
Because you are loading programs into a hardware target, the load process
takes a slightly longer period of time then loading in the simulator. Wait
for the
Load Complete
message in the
Output
window before you
attempt any debug activities.
To load a program, use the following procedure:
1. From the
File
menu, select
Load
.
The
Open a Processor Program
dialog box appears.
2. Navigate to the folder where your DSP executable file resides.
The demos supplied with the EZ-KIT Lite are located in the
..\218x\EZ-KITs\2181\Examples
subdirectory of your Visu-
alDSP++ installation directory.
3. Select the file and click
Open
.
The file loads and the
Load Complete
message appears in the
Out-
put
window when the load process has completed.
Summary of Contents for ADSP-2181
