UG-707
ADV8005 Hardware Reference Manual
3.3.1.1.
Autoconfiguration
Each block inside the VIM and the VOM can be automatically configured to decrease the configuration complexity. The
registers should be set to make the autoconfiguration work. The 59.94/23.97 Hz
timings have the same VID as the corresponding 60/24 Hz timing in
svsp_autocfg_input_vid[7:0]
, Secondary VSP Map,
Address 0xE660[7:0]
This register is used to set the input timing VIC. If this register is 0, SVSP will use values in registers of svsp_vin_h, svsp_vin_v and
svsp_vin_fr to set input video.
Function
svsp_autocfg_input_vid[7:0]
Description
0x00 (default)
Custom input video;
0xXX
Input timing VIC
Table 28: SVSP Supported Input Video Timing and VID
Video Timing
VID
CEA
640x480p60
1
720x480p60
2 or 3 or 14 or 15 or 35 or 36
720x240p60
8 or 9 or 12 or 13
1280x720p60
4
1920x1080p
16
720x576p50
17 or 18 or 29 or 30 or 37 or 38
1280x720p50
19
720x288p50
23 or 24 or 27 or 28
1920x1080p50
31
1920x1080p24
32
1920x1080p25
33
1920x1080p30
34
720p100
41
576p100
42 or 43
720p120
47
480p120
48 or 49
576p200
52 or 53
480p240
56 or 57
VESA timing
VGA
200
SVGA
201
XGA
202
WXGA
203
SXGA
204
WXGA-2
205
UXGA
206
WXGA-3
207
WUXGA
208
Note
: The SVSP does not support the following formats:
7.
1280x720p @ 23.97/24 Hz (CEA VIC 60)
8.
1280x720p @ 25 Hz (CEA VIC 61)
9.
1280x720p @ 29.97/30 Hz (CEA VIC 62)
Rev. A | Page 136 of 317
