ADV8005 Hardware Reference Manual
UG-707
svsp_dp_hfrontporch[11:0]
, Secondary VSP Map,
Address 0xE634[7:0]; Address 0xE635[7:4]
This signal is used to set the horizontal front porch duration of output timing. This register's value will be used while
svsp_autocfg_output_vid is 0.
Function
svsp_dp_hfrontporch[11:0]
Description
0x000 (default)
Default
0xXXX
Horizontal front porch of output timing
svsp_dp_hsynctime[9:0]
, Secondary VSP Map,
Address 0xE636[7:0]; Address 0xE637[7:6]
This signal is used to set the Hsync duration of output timing. This register's value will be used while svsp_autocfg_output_vid is 0.
Function
svsp_dp_hsynctime[9:0]
Description
0x000 (default)
Default
0xXXX
Hsync width of output timing
svsp_dp_hbackporch[9:0]
, Secondary VSP Map,
Address 0xE638[7:0]; Address 0xE639[7:6]
This signal is used to set the horizontal back porch duration of output timing. This register's value will be used while
svsp_autocfg_output_vid is 0.
Function
svsp_dp_hbackporch[9:0]
Description
0x000 (default)
Default
0xXXX
Horizontal back porch of output timing
svsp_dp_activeline[10:0]
, Secondary VSP Map,
Address 0xE63A[7:0]; Address 0xE63B[7:5]
This signal is used to set the active line number of output timing. This register's value will be used while svsp_autocfg_output_vid is 0.
Function
svsp_dp_activeline[10:0]
Description
0x000 (default)
Default
0xXXX
Active lines of output timing
svsp_dp_vfrontporch[9:0]
, Secondary VSP Map,
Address 0xE63C[7:0]; Address 0xE63D[7:6]
This signal is used to set the vertical front porch duration of output timing. This register's value will be used while svsp_autocfg_output_vid
is 0.
Function
svsp_dp_vfrontporch[9:0]
Description
0x000 (default)
Default
0xXXX
Vertical front porch of output timing
svsp_dp_vsynctime[9:0]
, Secondary VSP Map,
Address 0xE63E[7:0]; Address 0xE63F[7:6]
This signal is used to set the vertical synchronous time of output timing. This register's value will be used while svsp_autocfg_output_vid is
0.
Function
svsp_dp_vsynctime[9:0]
Description
0x000 (default)
Default
0xXXX
Vsync width of output timing
svsp_dp_vbackporch[9:0]
, Secondary VSP Map,
Address 0xE640[7:0]; Address 0xE641[7:6]
This signal is used to set the vertical back porch duration of output timing. This register's value will be used while svsp_autocfg_output_vid
is 0.
Function
svsp_dp_vbackporch[9:0]
Description
0x000 (default)
Default
0xXXX
Vertical back porch of output timing
Rev. A | Page 149 of 317
