UG-707
ADV8005 Hardware Reference Manual
2.1.
This section outlines the most practical modes in which the
can be configured, as recommended by ADI. These modes describe the
various ways to configure the VSP block, depending on the input formats as well as the outputs required.
afforded to the user in each mode. Depending on the desired output options, the appropriate mode should be chosen.
Table 3:
Modes of Operation
No. of Different
Output Formats
Interlaced Input
Format Allowed
No. of Output
Formats with
OSD
Input Video
Copy-Protected
Mode 1
3
Yes
1
No
Mode 2
3
Yes
3
No
Mode 3
2
No (if using SVSP)
1
No
Mode 4
2
Yes
2
No
Mode 5
3
No (if using SVSP)
3
No
Mode 6
2
No (if using SVSP)
1
No
Mode 7
1-2
Yes
1-2
Yes
Mode 8
1-2
Yes
1-2
Yes
Mode 9 - Bypass
1
Yes
0
Yes
Mode 10 (PiP)
2
No (if using SVSP)
2
No
Mode 11 (PiP)
1
No (if using SVSP)
2
No
Mode 12 (Dual OSD)
1
Yes
2
Yes
Mode 13 (RX OSD)
2
Yes
2
Yes
Mode 14 (3 Inputs)
3
Yes
2
Yes
1
For modes that offer four possible output formats, this means without reconfiguring the digital core. Only three possible output formats are supported at a single time: the
input format and the two converted formats.
2
The number of different output formats will be limited when using the ADV8005KBCZ-8B/8C.
Rev. A | Page 26 of 317
