12 A
NALOG
D
EVICES
,
I
NC
.
C
ONFIDENTIAL
DC9006A
AND
DC9004B
U
SER
G
UIDE
Programming Adapter
(DC9004B)
Introduction
The DC9004B Programming Adapter enables the DC9006 Interface card to connect
to a variety of interfaces on a customer board featuring an Eterna chip.
The DC9004B supports the following customer board connections:
•
the 2x5 2mm pitch programming header, described in the integration guide;
•
a .050” pitch variant of the programming header;
•
a 2x5 surface mount programming footprint, matching the Tag-Connect
TC2050-IDC ribbon cable with a 100” socket;
•
the 2x5 2mm pitch JTAG header described in the integration guide; and,
•
a 2x3 surface mount SWD footprint matching Tag-Connect TC2030-CDX
cable for the IAR I-Jet MIPI-20 connector.
Figure 6
DC9004B installed on a DC9006 (left)
