background image

 

235 2 Walsh  A ve. Santa Clara, CA  9 505 1. U . S. A . Tel.: (40 8) 7 48-91 00, Fax: (4 08) 748 -9 111      w ww .analo gtechnolo gies.com 

 

©

Copyrights 2000 – 2015, Analog Technologies, Inc. All Rights Reserved. Updated on 10/9/2015      www.analogti.com 

2

 

 

Analog Technologies 

Touch LED Table Lamp 

ATSLTL1R8W

 

 Figure 3. Solar charger 

F. Charge: When the product of the light intensity 
cannot be adjusted by the normal lightening or 
cannot charge the phone and other digital products, 
indicating that the product itself is not much 
rechargeable lithium battery, please charge 
immediately,  

 

          Figure 4. 12 hours highlighting lighting 

G. Calendar clock function instructions: 

1. Take the battery cover and remove button cells 
insulation slices, products to enter “normal mode”, 
and that state play 1 first music. LCD display for: 
12:00 1/1 THU. 

2. In normal mode, press MODE Key to show the 
following functions in sequence: 

Normal Mode---12 Hr/24Hr---Alarm---Birthday 
Reminding---Timer 

2.1 In normal mode, press MODE Key one time to 
enter into 12 Hr/24 Hr Mode. Press “

” Keys 

to switch over the two different displays format. 

Press “SET” key and 

 “

,

” Keys to set time 

and date.  

2.2 In normal mode, press MODE Key two times 
or press “AL” key directly to start Alarm Mode. 
The screen will show “ALARM”. Press “SET” 
key and “

,

” Keys to set the alarm time, 7 

different alarm songs and 2 different “didi” sound. 
Press “SET” key again to close Alarm function. 
When it is time to alarm, it will ring for one 
minute continuously. If snooze function is on, the 
alarm will ring one time every 3 minutes and 
repeat it for 4 times in sequence.  

2.3 In normal mode, press MODE Key three times 
to get into Birthday Reminding Mode. Press 
“SET” key and “

,

” Keys to set the time and 

date. Press SET” key again to close the Birthday 
reminding function. When the preset time arrives, 
birthday song will be playing for 5 minutes.  

2.4 In normal mode, press MODE Key four times 
to start Timer Mode. Press “SET” key and “

,

” 

Keys to set the countdown time ranging from 
23:59 hr to 00:00hr. When time arrives at 0:00:00, 
it will keep ringing for one minute, at the same 
time “0:00:00” will be blinking. Pressing any key 
to stop it.  

3. In normal mode, when ALARM displays on the 
upper of LCD, press “

”key to open or close 

“SNZ” function.  

4. In normal mode, press “

” key to open or close 

music appreciation providing 7 different songs for 
choice.  

5. In normal mode, press “SET” key to change in 

C

 /

F

 format.

 

6. In above mentioned terms, if free touch on keys 
is for one minutes, it will return to the Normal 
Mode. 

 

7.The units uses the one CR2025 button batteries, 
please replace batteries if the screen is not clear.  

 

 

 

Summary of Contents for ATSLTL1R8W

Page 1: ... charging line end USB socket of product base even the other end can be connected to the normal power computer s USB interface or USB interface of USB power adapter charging to product base after charging indicator light from red to yellow then to normal use B Power bank Built in high capacity rechargeable lithium battery can be used for mobile phone iPhone iPad iPod GPS and other digital products...

Page 2: ...rt Alarm Mode The screen will show ALARM Press SET key and Keys to set the alarm time 7 different alarm songs and 2 different didi sound Press SET key again to close Alarm function When it is time to alarm it will ring for one minute continuously If snooze function is on the alarm will ring one time every 3 minutes and repeat it for 4 times in sequence 2 3 In normal mode press MODE Key three times...

Page 3: ...www analogtechnologies com Copyrights 2000 2015 Analog Technologies Inc All Rights Reserved Updated on 10 9 2015 www analogti com 3 Analog Technologies Touch LED Table Lamp ATSLTL1R8W DESCRIPTIONS Figure 5 Accessories of ATSLTL1R8W Figure 6 Overall look and function indication ...

Page 4: ...of order acknowledgment including those pertaining to warranty patent infringement and limitation of liability Testing and other quality control techniques are utilized to the extent ATI deems necessary to support this warranty Specific testing of all parameters of each device is not necessarily performed except those mandated by government requirements 4 Customers are responsible for their applic...

Reviews: