Copyrights 2000 – 2012, Analog Technologies, Inc. All Rights Reserved. Updated on 11/22/2012
4
Analog Technologies
VC97
Multimeter
2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111 www.analogtechnologies.com
400nF
±(3.5%+8)
100pF
4
μ
F 1nF
40
μ
F 10nF
200
μ
F ±(5.0%+8) 100nF
Overload Protection: 250V DC/AC peak value
Warning
: Do not input any voltage at this range! When measuring, the capacitor should
be completely released and the power must be turned off.
Table 8. Frequency
Range Accuracy Resolution
10Hz
±(0.5%+4)
0.001Hz
100Hz 0.01Hz
1000Hz 0.1Hz
10kHz 1Hz
100kHz 10Hz
1MHz 100Hz
30MHz 1kHz
Input Sensor: 0.7V
Overload Protection: 250V DC/AC peak value
Table 9. hFE
Range Accuracy
Test
condition
hFE NPN or PNP
0~1000
Current is 15uA, Vce is
approx. 4.5V.
Table 10. Diode and Continuity Test
Range Accuracy
Resolution
Diode forward volt drop
Forward DCV is approx. 0.5mA,
reversed voltage is approx. 1.5V.
If the resistance of the two
tested points is less than
(70±10)
Ω
, buzzer sounds.
Open Circuit Voltage: 0.5V
Overload Protection: 250V DC/AC peak value
Warning
: Do not input any voltage at this range.
Table 11. TEMP.
Range Accuracy
Resolution
-40
℃
-1000
℃
<400 ±(0.8%+4)
℃
≥
400 ±(1.5%+15)
℃
1
℃
Thermocouple: K type
Warning
: Do not input any voltage at this range.
