Shot Box
2
-
Ref. SB80-2
For LivePremier™ and Midra™ 4K
QUICK START GUIDE
Thank you for choosing
Analog Way
and the
Shot Box²
. By following these simple steps, you will be able to easily
control your live events using the
Shot Box²
with the LivePremier™ series and the Midra™ 4K series.
• 1 x
SB80-2 Shot Box²
• 1 x Carrying case
• 1 x Quick start guide*
* User Manuals and Quick Start Guides are also available on
www.analogway.com
Go on our website to register your product(s)
and be notified about new firmware versions:
http://bit.ly/AW-Register
WHAT’S IN THE BOX
Register
your product
SYSTEM REQUIREMENTS FOR AW SHOTBOX CONTROL
Windows:
Microsoft® Windows® 10 or above, 100 MB of available hard-disk space for installation
LAN connection
macOS:
macOS X v10.15 or above, 100 MB of available hard-disk space for installation.
LAN connection
-
LivePremier™
firmware version 2.2 or above.
-
Midra™ 4K
firmware version 1.3 or above.
OVERVIEW
The
Shot Box²
is can be used to operate your LivePremier™ series or Midra™ 4K series with ease and comfort using
76 physical key buttons to load instantly up to 140 memories.
The
Shot Box²
can be used via direct connection on the device USB port (one USB controller maximum).
With the software
AW Shotbox Control
, it can also be used when connected to a computer on the same network
as the LivePremier™ or Midra™ 4K device.
Note
: One computer with
AW Shotbox Control
can only support one USB controller. One device supports up to 3
USB controllers connected via different com 1 USB controller connected on the device USB port.
