Installation Procedure for bkSpecto
IG42955-03
16-01724 rev 00
7/16
6
Set-up Side-mount basket (Optional – UA1379)
1. Remove the two screw covers using a thin screw driver.
Scanner Overview
Procedure
Place the screw driver in the pocket, press
upwards, and pull.
The locking
mechanism is casted
into the engine cover.
Screw covers with
the two pins.
A screw cover has two pins which fit into the
engine cover as locking mechanism.
CAUTION:
Make sure not to scratch the cover with the screw driver.
Note:
The basket can also be attached other places on the engine.
2. Remove the two M4X8 screws torx#20.
3. Mount the two new plastic knobs with the two new and
longer screws from the kit.
4. Click the screw covers on the knobs.
5. It is now possible to hang the basket on the scanner.
