ATA Pro
Technical Manual
Int. Approved
Document ref: HEL-810-12
December 2017
Page 13 of 27
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
5.3
Warranties
The
ATA pro
is supplied with a 2 year electronics warranty. The He
sensor is supplied with a 1 year warranty, and the O2 sensor is supplied
with a 3 year graded warranty detailed below.
1 year
Free replacement
12-18 months
75% credit towards a replacement sensor
18-24 months
50% credit towards a replacement sensor
24-36 months
25% credit towards a replacement sensor
5.4
General Care
Although designed to be water resistant the
ATA pro
should not be intentionally
immersed in liquid or left outside unprotected.
To clean the
ATA pro
use a damp soft cloth.
Protect the
ATA pro
from long periods of direct sunlight and do not subject it to
high or low temperature extremes.
The O2 sensor in the
Ax
ATA pro
is an electrochemical device and contains a
caustic electrolyte. Always check to make sure that it is not leaking and do not
allow it onto any part of your body or clothing. In the event that you do come
into contact with the electrolyte wash the contaminated part with copious
amounts of water (see 5.5 Safety Information).
sor Technology Ltd.
glo Enviromental Protection Ltd.
ANALOX 9100-9212-94
OXYGEN SENSOR
beck Court
Business Park, Stokesley
S9 5PT England
44 ( 0 )1642 711400
WARNING
If after handling the
sensor your fingers or
other parts of your body
feel slippery or stings
wash with a lot of water.
If stinging persists get
medical attention!
