17
www.anatomicsitt.com | +46 11 16 18 00
User manual Zitzi Flipper Pro
Zitzi Flipper Pro may only be provided with spare parts delivered by
Anatomic SITT AB.
Maintenance instructions
Cleaning the chassis
Clean the chassis regularly with car shampoo or similar. When extreme condition, a
degreasing agent can be used. Avoid electrical details and do not use a degreasing
that remove grease. Think of the environment! Please use a biodegradable agent.
The battery
Reconditioning
Control
Check all moving parts for wear and tear. Exchange if necessary. Check regularly
the general condition of the chassis and that all screws are tightened properly.
If you are insecure, please contact us.
!
Important!
The gas piston should be used regularly to maintain
functionality. When the product is not used, the gas piston must be
activated at least once every 6 months. Also, when storing the product,
make sure that the piston rod is positioned pointing downwards. If not,
the gas piston seal might break and the piston lose its function.
Gas piston
Charge the battery for 24 hours the first time
Thereafter, charge it every night
Never let the battery uncharge completely, if so the battery may be
damaged
Spare parts
Electronics
The electronics are IP-rated: IPX0. This means that it should only be cleaned with a
damp cloth.
