6
User manual – Pengy Pro Seat
6
www.anatomicsitt.com | +46 11 16 18 00
Adjust seat depth and Leg length difference
Loosen the screw (A) on the leg part with the help of the adjustment key, and then
adjust the leg part to the desired length� Then tighten the screw (A) again�
Abduction, adduction and windswept
To adjust the leg part to any of these positions, loosen the screw (A) using allen
key, and move the leg part to desired postion� Tighten the screw (A)�
Adjusting the seat pocket
When adjusting the seat depth, the seat pocket should also be adjusted�
Loosen the leg parts screws (B) with the allen key� Use the color code of the seat
depth and adjust the seat pocket to the desired position� Tighten the screws (B)�
Seat part
Size label/Colour code
Seat pocket plate
A
B
Note!
You don’t have to remove the screws completely to adjust, just
loosen them slightly�
Tip!
To get a good starting point for setting the seat depth, the color
scale on the seatbase and depth adjustment plate can be used as a
guide� For example if the seat depth is adjusted to blue field the depth
adjustment plate should also be set to the blue field� This ensure a
correct seat pocket size according to the seating position� Always fine-
tune the settings after each users requirements�
100 mm
11 mm
15 mm
40 mm
8 mm
10 mm
STORLEK 1
SKALA 1:1
PENGY
DETTA SKA VARA PÅ EGET ARK
21
22
23
24
25
26
27
28
20
19
21
22
23
24
25
26
27
28
20
19
