Copyright © 2006-2015Shenzhen ANB Technology Co., Ltd. All rights reserved.
This collates time function is for the purpose to maintain a time clock when GPS time is not
Available
•
Recover Factory:
By click this button to reset all CT2000 parameters to be factory default setting.
•
Language Configure:
Adjust Configurator language.
5.2 Basic Parameters:
-
GPRS Setting
：
•
Mode: select data transfer mode for GPRS connection – TCP/IP or UDP/IP; CT2000 gets
TCP/IP supported only now.
•
APN: (Access Point Name) this is operator provided parameter and is used to open GPRS
connection in GSM network. Please contact your GSM operator to find out your APN.
•
Username: APN username used to open GPRS connection in GSM network. In some cases it
is not required and field is left blank.
•
Password: APN password used to open GPRS connection in GSM network. In some cases it
is not required and field is left blank.
•
IP: this is destination server IP address to which CT2000 is sending data using GPRS.
•
Port: this is destination server port number to which CT2000 is sending data using GPRS.
-
GPS Fix
•
Timeout:
In preset wake up time, CT2000 will wake up to get current location via GPS. But in some
area, there is with very low signal, or not possible to get signal at all, in order to not use out
the battery, we have to define a maximum signal searching time. Normally you can put as
3Minutes. If 3 Minutes passed, device will back to sleep no matter it gets valid or invalid
signal.
-
SMS Setting
