AMD2000 Series D2xxx Servo Drive - User Guide
38
D-000088 Rev 10
ANCA Motion
6.6
Power Supply Soft Start Module
The AMD2000 servo drives
control power supply
causes an in-rush current on start-up due to the input
capacitance. For multidrive applications, the recommended circuit is one 2A breaker per drive. For applications
which cannot use the recommended circuit, an optional accessory called an AMD2000 Soft Start Module can be
used to control the total inrush-current to less than 2A and avoid the control circuit breaker being tripped.
Note:
ANCA Motion’s
preferred
power wiring configuration for multidrive applications is to install a
separate circuit breaker for each AMD2000 servo drive.
Only use the Soft Start Module if
installing multiple circuit breakers is not viable.
Warning:
Only use the Soft Start Module with AMD2000 servo drives.
6.6.1 Soft Start Module Wiring
illustrates the recommended wiring for the Soft Start Module.
Figure 6-9 Power Supply Soft Start Module Wiring Diagram.
The Soft Start Module wiring is identical for 1-phase and 3-phase installations, downstream of the filter.
The Soft Start Module uses a 2 pin cage clamp connector. When wiring the plug follow the instructions
for stripping and preparing the wire detailed in
Select wire gauge by referring to the minimum requirements of the 1-phase control circuitry specified in
6.7 Power Disconnect and Protection Devices.
Ensure the plug is fully inserted into the connector of the Soft Start Module before operation.
Summary of Contents for AMD2000 Series
