7
STEP 3
Fix the Saddle (8) to the Horizontal Sliding Bar (7) with the provided 13-15 Wrench (25) until tight.
STEP 4
a.
Before fixing the Handlebar Support Tube (26), please connect the tension and sensor cables as
shown in the following illustrations:
(1)
Adjust the tension control to 8 levels, making sure the supper tension cable (A) to bet the longest.
(2)
Insert the upper tension cable (
A
) to the hole (
C
) in the middle of the lower tension hook (
B
). Then
pull the upper tension cable (
A
) till the metal head (
D
) drop into the hole to lock in.
(3)
Connect upper sensor cable (
E
) to lower sensor cable (
F
).
Summary of Contents for MAGNETIC BIKE
Page 4: ...4 EXPLODED VIEW ...
