2:Operating Instructions
2.1 Operation Instructions for Room Station
Speaker Hole
4" LCD
Fig. 2.1 The Room Station
a. After a guest has arrived, entered a code on the entrance station, then pressed
the CALL button, the room station will emit a Ding-Dong sound, and the screen
will turn on, showing an image of the guest. If the host feels that the image on the
screen is not good, the brightness and contrast can be adjusted by using the
knobs on the bottom of the Room Station.
b. When the host picks up the handset portion of the room station, they can
immediately begin speaking with the guest.
c. If the host wishes to let the guest enter the building, simply push the DOOR
OPEN button to trigger the electronic lock letting the guest enter.
Please note that the host must decide whether or not to let the guest enter within 30
to 40 seconds from the time the handset was lifted. Otherwise, the guest will
have to enter the code again. If the host does not hang up the handset, the call
will automatically be re-routed to the control center guard station (buildings
without security stations do not have this function).
d. Under normal conditions and when there is a central control guard station
present in a system, if the room station's handset is lifted, and the CALL button
is pressed, the room station will be connected with the control center guard
station.
c. The volume of the Ding-Dong sound can be adjusted with the volume knob on
the bottom of the room station.
"Door Open"
Indicator LED
"Open Door" Button
"Monitor" Button
Contrast Knob
Brightness Knob
Power / Volume
Knob
Receive
Magnetic Hook
Microphone
Magnetic Hook
"Call" Button
Handset
5
