BASIC SYSTEM OPERATION
1. Charge batteries for 6 hours or until charger LED turns of
NOTE: Belt packs operate about 7 hours per charge.
2. Plug headset cable into belt pack & adjust boom
3. Hold down PWR button to turn belt pack ON
4. Set belt packs to same GROUP
5. Adjust Headset Volume level
6. Press & hold PTT button to talk, (belt pack top)
release PTT button to listen
NOTE: Repeat steps for each belt pack in the network.
See page 3/Active Mode for voice activated operation.
SYSTEM RANGE
AnchorMAN belt packs can communicate through many solid objects.
However, if the solid objects contain metal or liquids, range will be re-
duced. Also, range will reduce as the path between belt packs becomes
more obstructed. As belt packs get farther apart AnchorMAN automati-
cally reverts to simplex mode for a maximum range of 2,500’/750m
(EU max. range: 1,000’/305m). This means you will operate in Push
to Talk mode and speak one person at a time. If the signal fades the
belt packs are too far apart and you will need to move closer together.
SYSTEM COMPONENTS
BP-900
Wireless Belt Pack
BP-900EU
Wireless Belt Pack
(European frequencies)
H-200
Dual Ear Muff Headset
H-200S
Single Ear Muff Headset
GC-900
Gang
Charger
HC-1600A
Pelican Hardcase w/ Custom Foam Insert
MAN-40
Four User Package:
• 4 - Belt Packs
• 4 - Headsets (single or dual muff)
• 1 - Gang Charger
• 1 - Lightweight, high-density storage case
6
HEADSET JACK
XLR Connector
ANTENNA JACK
SMA Connector
HEAVY DUTY ANTENNA
MICROPHONE SENSITIVITY
Page 5
HEADSET VOLUME CONTROL
Page 5
POWER BUTTON
BATTERY COMPARTMENT
Press lightly & slide to
remove cover
BELT CLIP
GROUP SELECTOR BUTTON
Page 3
PUSH TO TALK BUTTON
Page 3
TRANSMIT/RECEIVE INDICATOR LED
GROUP SELECTOR LED
ANCHORMAN BELT PACK
Model Shown: BP-900
CHARGER PORT & CHARGER LED
Connect Gang Charger for NiMH batteries
DIP SWITCHES
Preset at factory
DIP Settings:
For videos on how to setup & use your
AnchorMAN wireless intercom system go to:
www.anchoraudio.com/anchorman.php
7
