30’
CLASSIC FRAME TENTS
|
DISASSEMBLY INSTRUCTIONS
1.
Remove Sidewalls, Liners and Drapes. Fold and roll for cleaning and/or storage.
2.
Loosen all Ratchet Straps or Guy Ropes. Leave Corner anchoring in place for now. Remove all anchoring
from the side Mid-Rafter Legs.
3.
Adjust the tent height on all the Legs to the lowest height.
4.
Leaving any corner straps secured to keep cover from falling or blowing off, unfasten the Cover straps
and buckles along the inside perimeter of the frame.
5.
Leaving the corner Legs and anchoring in place, remove the Legs from the Mid-Rafter Fittings on the
shorter sides first, and then remove on one of the longer sides.
6.
Remove the anchoring straps from the Corner Fittings and Legs on the same side. Remove the two
corner Legs and carefully lower this side of the frame to the ground.
Note: Corner legs should be
removed at the same time and the entire length of the frame should then be lowered. Do not remove and
lower one corner at a time. Use tent jacks if necessary to support and lower the side of the tent.
7.
Repeat on the opposite side.
8.
Lay out a drop cloth along one side of the frame and cover to protect the cover from dirt and abrasions
as you remove it. Unfasten the rest of the Cover straps and carefully remove the Cover onto the drop
cloth. Fold and roll the Cover as tightly as possible. Do not stand or walk on the Cover fabric as you
remove and fold it. Store cover in storage bag.
9.
Disassemble the frame in the opposite order of assembly.
10.
Remove all stakes. Roll and store guy ropes and ratchet straps.
