20
6.1.1 Register/Remove flow meter
Browse into Reg(istration)/remove flow meter menu, There is current registration
information as following. If not registered, will show “not registered”. Push
【
Menu
】
key to
choose register or remove, push
【
Enter
】
key to execute.
Registration
：
Any registration needs to do with main controller simultaneously. Both need to be at
registering stage. Example
：
Register flow meter as #1 flow meter in the system, procedure as
following:
Browse into flow meter setup ->choose register/remove menu ->choose “Register” ->push
【
Enter
】
into setup as following
：
For main controller, browse into devise setup->Register/Remove ->flow meter
register/remove ->key in flow meter #, like #1 ->choose register ->push
【
Enter
】
to start.
Reference main controller manual.
If register right, main controller and FMP controller both will beep two times. Show
registration information on FMP controller LCD.
Note:
１ ，
During registering, push
【
Exit
】
key will cancel registration and back to
registration menu.
２，
If there is previous registration information, don’t need to remove, new information
Summary of Contents for FMP-Solar
Page 6: ...5 How to install pump...
