21
will overlap old ones.
How to remove
：
There are two kinds of remove operation, one is remove registration information from main
controller and field controller simultaneously, and another is remove from field controller
only, and remove from main controller later on.
Remove from field controller only
：
When [Remove] menu is been chosen, push
【
Enter
】
key to confirm, LCD show
“Removing…..” as following
：
During removing, FMP controller will try to communicate with main controller, but main
controller is not at remove status.
After FMP-Solar failed to reach main controller, push
【
Exit
】
will exit from registration,
otherwise LCD will ask if you want to do “Local delete?”. Choose Exit to exit, choose
Enter to remove.
Note
：
After remover registration information from FMP controller, needs to remove this
registration information from the main controller separately. Otherwise the main controller
will report wireless communication failure, and add extra scan time. Detail reference main
controller manual about registration and remove.
Summary of Contents for FMP-Solar
Page 6: ...5 How to install pump...
