ANC Technology
4
Fig 6
5. How to operate
:
5.1 Check if the installation is OK, then drain water once:
Open the metal cap, user can see the control panel, push and hold the
“←”
key
about 10 seconds, wait until all the 4 lights on the panel are light up, release the key,
then only lights for
“
8 hour
”
and
“
24 hour
”
are flashing, after another 10
seconds, controller will change water. If it not, maybe the electricity power is not
fully charged. Put under sun, after some time, repeat above again.