Ancor 703023 Operator'S Manual Download

Page: 9 / 12

ancorproducts.com | 800.307.6702

OPERATOR'S MANUAL:

120V TWO SETTING HEAT GUN

HEAT GUN CONTENTS

Trigger Switch

Air Nozzle

Reflector Nozzle

Deflector Nozzle

UNPACKING AND CONTENT

IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is faulty

or that a part is missing. If you find anything wrong, do not operate the tool until the

parts have been replaced or the fault has been rectified. Failure to do so could result in

serious personal injury.

Contents in package:

• (1) Heat Gun
• (1) Reflector Nozzle

• (2) Deflector Nozzle
• (1) Operator's Manual

OPERATION

WARNING

Always check that the power supply corresponds to the voltage

on the rating name plate.

WARNING

Always be sure that the tool is switched off and unplugged

before adjusting, adding accessories, or checking a function on

the tool. Your heat gun is a high-quality, general purpose heat

gun. Its high power and air flow ratings enable you to perform

more heating jobs faster and more efficiently whenever fast,

consistent and portable heat is needed.

Summary of Contents for 703023













Search results

Summary of Contents for 703023

Reviews:

Related manuals for 703023

Brands by name

Popular brands

Ancor 703023, Operator'S Manual

Search results

Summary of Contents for 703023

Reviews:

Related manuals for 703023

Brands by name

Popular brands