23
77.3.3.2. Transmitting Weighing Data and
Environmental Data
Step 1 Connect the AD-1687 to the weighing instrument with
the RS-232c cable while the AD-1687 is powered off.
After that, connect the AD-1687 unit to the PC with the
USB cable. After connecting, the display will change the
"8.3.1" display.
Step 2 Select the item "REAL TIME" and press the ENTER key
to use the real time transmission mode.
Step 3 Click on a position (cell) on the program (EXCEL etc.) to
receive data.
Step 4 Press the data output key (Ex.:PRINT key) of the
weighing instrument to send weighing data. When the
main unit of AD-1687 receives data, a buzzer sounds and
weighing data and environmental data are sent to the
computer.
Step 5 Data is displayed for 5 seconds on the measurement
monitor.
Note
ڦ
If the timing of the transmission is short, data may not be saved
depending on the PC performance.
RS-232C
cable
USB cable
Weighing instrument
Personal Computer
Summary of Contents for AD-1687
Page 1: ... QYLURQPHQW RJJHU QVWUXFWLRQ 0DQXDO 03 ...
Page 29: ...27 MEMO ...
Page 30: ...28 MEMO ...
Page 31: ......