47
19. Password Lock Function
The passcode lock function is a feature that allows you to limit changes to the function table of
the scale.
In the factory default setting, the password lock function is disabled.
To enable/disable the password lock function and to register the password, refer to the class
pa55wd
in "
” .Set the password according to the table below. For
gUe5t
,
see "
19.2. To Change the Function Table After Setting
Funtion table Value
Content
lock
0
No password lock.
1
Password lock is available.
2
Password lock is available with key restrictions
(Only the ZERO and TARE keys can be operated during
weighing.)
pa55no
Register a password.
19.1. Setting Procedure
1. With the display turned off, while pressing and holding the
TARE key, press the ON/OFF key to turn the display on
and display the class
func
. Press the MODE key to
select the class
pa55wd
, and then press the TARE key.
2.
pa55wd
appears. Refer to the table above to change items
or setting details.
□
To change the password only, select the setting item
pa55no
with the MODE key.
3. Press the TARE key to store the setting.
pa55no
appears after
end
.
4. After about 2 seconds, the password input screen will appear.
Refer to the table above to set the password and press the
T
TARE key to appear the class
func
after
end
.
□
To cancel the restoring procedure, press the ZERO key.
Keys
Content
Moves to the next item.
Increases the blinking digit by 1.
Sets the parameter.
If changed
Press
Press
Press
Press
Press
