27
10.4. Buzzer Setting
Installing the optional HVW-04CWP comparator relay output on the scale allows the buzzer to sound in
conjunction with LEDs according to the comparison result.
The buzzer can be set by using the 1 , 2 , 3 , 4 , and 5 numerical keys when
of
the function table is displayed.
To set the buzzer to sound according to comparison result, select the corresponding numerical key to light
up the LED (showing that the buzzer is on) or turn it off (showing that the buzzer is off).
Each LED can be toggled between on and off by pressing the corresponding key.
Corresponding numerical key
1
2
3
4
5
LED for the comparison result
LOLO
LO
OK
HI
HIHI
Image of display during setup
Example
:
When the result is LOLO or OK, the buzzer sounds.
Step 1 Press the 1 key to light up the LED for LOLO.
If the result is LOLO, buzzer sounds
Step 2 Press the 3 key to light up the LED for OK.
If the result is OK, buzzer sounds
Step 3 Press the ENTER key to store the settings.
Caution
When the three-level comparator mode is used, 1 LOLO, 3 OK and 5 HIHI are
used for buzzer settings. 2 HI and 4 LO are not used.
Corresponding numerical key
1
2
3
4
5
LED for the comparison result
LOLO
LO
OK
HI
HIHI
Image of display during setup
