45
Command Mode
In the command mode, the scale is controlled by commands that come from an external device such
as a personal computer.
Command List
Command
Description
Remarks
Q
Requests data be output immediately.
Z
Zeros the scale when the weight is stable.
Same as the ZERO key.
T
Tares the scale when the weight is stable.
Same as the TARE key.
U
Switches the weighing unit.
Same as the MODE key.
CT
Clears tare
PT
Sets preset tare
PT,+000000
＜
CR
＞＜
LF
＞
A
Outputs accumulation values
N
Outputs the number of accumulations
CA
Clears accumulation
ID
Sets the ID number
ID: xxxxxx
＜
CR
＞＜
LF
＞
?ID
Requests ID number
?PT
Outputs the preset tare value
?H3
In five-level comparator mode: Not used.
In three-level comparator mode: Not used.
In seven-level comparator mode:
Threshold value of rank 5 is output.
The output of setting values for
comparator mode
Five-level (
Cp-l 0
)
Three-level (
Cp-l 1
)
Seven-level (
Cp-l 2
)
The output of setting values for
?H2
In five-level comparator mode: HIHI limit value is output.
In three-level comparator mode: HI limit value is output.
In seven-level comparator mode: Threshold value of
rank 4 is output.
?H1
In five-level comparator mode: HI limit value is output.
In three-level comparator mode: Not used.
In seven-level comparator mode: Upper threshold value
of rank 3 is output.
?L1
In five-level comparator mode: LO limit value is output.
In three-level comparator mode: Not used.
In seven-level comparator mode: Lower threshold value
of rank 3 is output.
?L2
In five-level comparator mode: LOLO limit value is
output.
In three-level comparator mode: LO limit value is output.
In seven-level comparator mode: Threshold value of
rank 2 is output.
