14
MVHR Installation Checklist
REQUIRED TO BE COMPLETE TO COMPLY WITH CONDITIONS OF WARRANTY,
but does not affect statutory rights.
This is a short check list of good practice do’s and don’ts that may affect the safety or functionality of the
installation. It is not a complete list of what is required. They must be complied with in order to ensure
that the installation performs as expected.
Unit Serial number: ______________ Installer’s name: _________________________
Check
Date
and
initials
1. Is the unit stable and
horizontal with room around it to
allow maintenance?
2. Is any flexible ducting pulled
taut to prevent moisture
collection and avoids airflow
issues?
3. Is any flexible ducting
crushed which will cause airflow
issues?
4. Are all joints in the ductwork
sealed to prevent air leakage?
5. Is the ducting insulated to
prevent condensation and
cooling or heating of the air?
6. Does the condensate drain
a) have the correct slope to
ensure water runs away and b)
is fitted with a trap to prevent
smells coming back into unit?
7. If the condensate drain
passes through a cold space is it
insulated to prevent freezing?
See the Installation Guide and Checklist at:
http://www.sap-appendixq.org.uk/documents/MVHR_Installation_Guide_Final.pdf
442920 D
1012
