PRODUCT MANUAL
68/72ST Above Deck Compact Motor
™
8
STEP 2
Prepare the mounting surface
2.1 After determining the mounting location and orientation, clean
the mounting surface and use the drilling template [A3] as a
guide. Ensure that the surface is flat and there is adequate space
and clearance for operation of the winch.
2.2 With the drilling template in the desired orientation, drill the
Ø10.5mm holes for the M10 mounting bolts (or Ø13/32” holes
for 3/8” bolts).
2.3 Cut the required holes for the motor terminals, drain port and
wiring as indicated on the drilling template
2.4 Clean any wood or fibreglass splinters from the holes, and clean
the deck thoroughly to ensure deck sealant can adhere properly.
Drilling template use
